This protocol offers two-way communication between devices over a single HDMI connection. Since ARC was introduced init has become a very common standard, and you'll find it on virtually all TVs, soundbars and receivers sold in recent years. Anything that works with the HDMI 1. First, you can connect your audio system with a single HDMI cable.
Connect your soundbar to the TV using the designated ARC-capable port, and you can use it for every device that connects to the TV, including Blu-ray players, game consoles and other devices. And it does that through the TV itself, instead of requiring a separate audio receiver.
What Is HDMI ARC?
Second, you can run these connections through the soundbar itself, letting you shift the multiple HDMI connections from the TV to the soundbar without requiring any additional setup. This is especially helpful for instances in which your TV is wall mounted and you either don't have access to all of the HDMI ports or simply want a cleaner look with fewer cables running to and from the TV.
It also means fewer cables to install. Audio going to the TV from an antenna, for example, can also be output over HDMI and piped through the soundbar instead of just the TV's built-in speakers. This is especially important for smart TVs, for which streaming services deliver all content via Wi-Fi, with nothing to feed into a receiver. Instead, the ARC connection lets you output that sound to your soundbar without having to connect with a dedicated audio cable.
By using the ARC connection for audio and the HDMI-CEC functionality this should be enabled on your TV by defaultyou can reduce both the number of cables used and the number of remote controls needed for your home theater.
It may take a couple of extra steps to get everything activated and set up for ARC, depending on your TV's manufacturer and the specific model. First, determine which port s have ARC support. This is usually indicated by a label on the set itself. You will generally find this feature in the Settings menu, under Audio. While many TVs auto-detect devices with ARC capability, others require you to turn on the feature manually. Finally, just plug in your stuff. This is dead simple; any HDMI cable will work.
The only thing to keep in mind is that the ARC-enabled port needs to be connected to your external audio device. It can handle both the TV's regular two-channel audio and 5.
This is especially irritating because downstream audio over HDMI can carry the signal with no problem; it's purely a limitation of the ARC spec. Even more irritating, some TVs actually downgrade the audio output over ARC, converting everything to two-channel sound even if it originated as 5. It's not common, but depending on your make and model of TV, you might actually wind up with lower sound quality over ARC. In these instances, connecting an extra audio cable or two may be worth the trouble.
HDMI ARC Vs eARC: what is the new enhanced audio return channel?
This is no ordinary HDMI port. HDMI ARC can greatly simplify your audio cabling needs and setup if you know where to look for it and how to implement it. But without a receiver handling the audio in a central location, how do you get the sound from the HDTV to the auxiliary speakers like that nice new soundbar you picked up?
Since HDMI 1. In theory, using this feature should be as simple as plugging in an HDMI cable. In practice, however, labeling methods or lack there ofmanufacturer standards, and other variables can get in the way.
With that in mind, the best thing you can do is read the fine print, and closely at that. In practice, some manufacturers and models have weird rules regarding how the sound is delivered. For example, some TVs will only pass along the sound that is generated directly on the TV itself by, say, the internal over-the-air tuner or a built-in smart app but will not pass along sound that is piped in by one of of the HDMI ports say, from your attached Blu-ray player.
Finally, there is one rare pitfall that not too many people these days will run into. If you have a very old pre-HDMI 1. The Best Tech Newsletter Anywhere. Joinsubscribers and get a daily digest of news, comics, trivia, reviews, and more. Windows Mac iPhone Android.
HDMI ARC and eARC: What they are and why you should care
Smarthome Office Security Linux. The Best Tech Newsletter Anywhere Joinsubscribers and get a daily digest of news, geek trivia, and our feature articles.
Skip to content. How-To Geek is where you turn when you want experts to explain technology. Since we launched inour articles have been read more than 1 billion times. Want to know more?I'm having problems trying to get my HDMI audio output to work correctly. By default, with or without and external monitor connected, the audio is heard from my notebook speakers or from the headphones, when I plug them in.
I found a section in the wiki regarding my problem, but it doesn't look like the proper solution. Running aplay -l returns:. And finally creating a. The thing is that I don't want the sound to go out that way always, but only when the HDMI cable is connected. I'd like to have a practical way to switch between both of them or maybe, even making it automatic later by writing some script.
What do you think is the best way to do it? If some more information is needed, please tell me how can I get it. Great, I'll try your solution and use it until I can find a better way, at least Do you get to control the level of the digital output, somehow?
OP, this is exactly the same query that just popped into my head. It occurs to me that we may be able to use udev to detect hdmi cable un plugging. This is on the right track. I plan to look into this more over the next few days, but feel free to get started without me. I've been trying to make some progress on this. I have a udev rule and a script that switches the audio device.
The script definitely works fine when I run it manually, but I'm having trouble getting udev to use it. I wonder whether the "Permission denied" error in this latter output is relevant?
I tried googling on:. OP, would you mind testing whether you can get this working, then maybe we can mark this fella solved. I'm sorry I've been out this days I'll certainly check out your solution today or tomorrow at most and let you know. Your solution worked flawlessly in my machine.Is your home entertainment system pumping out maximum quality audio?
Subscribe to RSS
Unless your equipment boasts HDMI 2. Standard ARC has been around a while, connecting your TV and hi-fi equipment into one, seamless and less cable-heavy entertainment system. However, now comes eARC to take audio to the next level.
Audio Return Channel ARC is a type of audio transmission that links up your speaker output to your television controls, meaning you don't need a separate remote or interface to manage the volume.
But with ARC, they can also send audio in reverse, from a TV into an external speaker or soundbarwithout having to attach a separate audio cable. Ready to remove one more remote from your already way-too-complicated home entertainment setup?
Here's how to do it. It does this by first forming a 'handshake' between the TV and the audio device, creating a two-way street for information. Put simply, ARC is a cable-killer. Lip-sync functionality was introduced in HDMI 1. All HDMI standards since have automatically compensated for any processor delays whether the audio is traveling upstream or downstream.
HDMI 2. As well as being built to handle the next generation of video — 8K resolution at frames per second HDMI 2. Not as many as hoped. It seems that some features of HDMI 2. So some and even TVs, AV receivers and soundbars have had firmware updates to make those features live. The HDMI 2. Another little-discussed part of HDMI 2. It allows the TV to set the ideal latency the delay when you refresh a web page — or stream a game to create smooth, lag-free viewing and interactivity.
Please deactivate your ad blocker in order to see our subscription offer. What is ARC? Why do we need ARC? Amped up about better audio? That means the surround sound we listen to is being substantially upgraded.It was introduced in HDMI ver1.
If you receive TV signals via an antenna, audio from those signals goes directly to your TV. To get the audio from those signals to a Home Theater receiver, you have to connect an extra cable either analog stereodigital optical, or digital coaxial from the TV to the home theater receiver. In addition, audio sources connected directly to the TV via internet, digital, analog, and, in some cases, HDMI inputs may also be accessible via the Audio Return Channel function.How To Extract Audio Out Of HDMI Cables With A DotStone HDMI Audio 236
The example shown above is for a Roku TV. Although Audio Return Channel should be a quick, easy, solution for sending audio from a TV to a compatible external audio system, there are some inconsistencies, based on how specific TV makers implement its capabilities. Unfortunately, TV makers don't always publicize what audio formats are supported on each specific TV. Check your user guide, or contact tech support, for the exact activation steps and features. Although Audio Return Channel was initially designed for use between a TV and home theater audio system, a select number of soundbars also support it.
If you're shopping for a sound bar and desire this feature, check the features and specifications, or do a physical inspection at the store if units are on display.
It only takes a minute to sign up. Using VLC 2. At the moment, sound is played using the laptop's speakers. I can do that with pavucontrolinstall it with pacman -Sy pavucontrol. As described hereyou can set the profile also from the command line with. Since pavucontrol uses PulseAudiothis has to be installed as well: pacman -S pulseaudio.
After restarting PulseAudio's systemd job probably needed to be uppavucontrol can connect to PulseAudio. Sign up to join this community. The best answers are voted up and rise to the top. Asked 3 years, 1 month ago. Active 1 month ago. Viewed 37k times. Currently, I'm trying to output sound to the TV's speakers.
Matthias Braun. Matthias Braun Matthias Braun 4, 3 3 gold badges 25 25 silver badges 38 38 bronze badges. Active Oldest Votes. Now, sound works perfectly on the TV speakers. As described hereyou can set the profile also from the command line with pactl set-card-profile 0 output:hdmi-stereo Since pavucontrol uses PulseAudiothis has to be installed as well: pacman -S pulseaudio.
Is there any possibility to get this directly as an output device without having to change the configuration profile? Selecting another source for the playback, I successfully manage to get my audio output from monitor working! Thank you, you save my day!! Sign up or log in Sign up using Google.
Sign up using Facebook. Sign up using Email and Password. Post as a guest Name. Email Required, but never shown. The Overflow Blog. Podcast Ben answers his first question on Stack Overflow. The Overflow Bugs vs. Featured on Meta.
Responding to the Lavender Letter and commitments moving forward. Linked Related Hot Network Questions.The last few years have been amazing for our home theaters.
With UHD TVs and new and powerful audio codecs like Dolby Atmos becoming the new norm, homes where a full theater experience was once impossible are now seeing their day in the sun.
Rather, ARC stands for audio return channel, a little-understood protocol that started showing up on HDMI-equipped devices a few years ago before evolving into a now-ubiquitous standard. The technology is incredibly useful and has the potential to significantly simplify your entertainment system in a myriad of ways, starting with controlling all your audio from one remote.
HDMI has been around since Chances are you use it now, but you may not know how versatile it is. The system was created as a faster, more efficient way to deliver high-quality digital video and audio to and from consumer electronic devices. A constantly evolving format, starting at the p-capable HDMI 1. The latest iteration, HDMI 2. With HDMI 2. That equates to faster and more efficient transmission to keep up with the monstrous bandwidth demands from video and audio of the future — right up to a whopping 48Gbps.
The HDMI 2. Back to the present day: Many people currently use HDMI strictly as a means for connecting their cable boxes, Blu-ray players, and game consoles to their TV, but that little cable connection can do so much more.
CEC lets a single remote control operate features on up to 15 connected devices. ARC can help. Simplicity is the name of the game here. More on that below. You may find similar results with other components as well, including Blu-ray players and set-top boxes.
Your exact level of functionality largely depends on each individual piece of this convenience puzzle. Not all TVs, disc players, media boxes, and audio systems interact with each other in exactly the same way.
As a general rule of thumb, matching brands should give you the best overall experience, and those going the heterogeneous route will want to search for any potential compatibility issues before making all the necessary purchases. Why is that necessary? Convenience and sound quality.
In the past, this would have required that you connect another cable like a digital optical cable to link your TV with your receiver. If you think that sounds great, just wait for eARC trickle down from top-of-the-range flagship TVs to the mainstream budget sector. You will be able to get the very best surround sound to any of your audio devices with no compromise.
Today, many TVs dumb down and compress audio signals before passing them through an HDMI cable, while others do support more channels and even Dolby Atmos, albeit using a more compressed codec like Dolby Digital Plus instead of Dolby TrueHD, which requires too much bandwidth. With eARC, the original, full-resolution audio signal can be sent via the HDMI cable — again, producing the very best sound with no compromises.
With eARC, that connection just gets better, with no degradation of the audio signal imposed by your TV. Ever had trouble with lip-sync problems?
Those are issues of the past with eARC. In theory, this new protocol also means manufacturers could create a new wave of audio-only receivers, soundbars, and amplifiers, as your TV would be able to handle the video signal while still allowing for the highest-quality audio to make its way to your sound system.
This could significantly reduce the cost of all kinds of home theater components. With that in mind, we must point out that new technology takes time to become widely available. HDMI 2. Like all technologies, the future of home theater is announced and planned long before it becomes the standard.